Search results
Results from the Tech24 Deals Content Network
The first letter of the color code is matched by order of increasing magnitude. The electronic color codes, in order, are: 0 = Black; 1 = Brown; 2 = Red; 3 = Orange; 4 = Yellow; 5 = Green; 6 = Blue; 7 = Violet; 8 = Gray; 9 = White; Easy to remember. A mnemonic which includes color name(s) generally reduces the chances of confusing black and brown.
A 2.26 kΩ, 1%-precision resistor with 5 color bands (), from top, 2-2-6-1-1; the last two brown bands indicate the multiplier (×10) and the tolerance (1%).. An electronic color code or electronic colour code (see spelling differences) is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others.
Atari ST series. The Atari ST series has a digital-to-analog converter of 3-bits, eight levels per RGB channel, featuring a 9-bit RGB palette (512 colors).Depending on the (proprietary) monitor type attached, it displays one of the 320×200, 16-colors and 640×200, 4-colors modes with the color monitor, or the high resolution 640×400 black and white mode with the monochrome monitor.
Web-safe color. v. t. e. Color depth or colour depth (see spelling differences ), also known as bit depth, is either the number of bits used to indicate the color of a single pixel, or the number of bits used for each color component of a single pixel. When referring to a pixel, the concept can be defined as bits per pixel (bpp).
Systems with a 9-bit RGB palette use 3 bits for each of the red, green, and blue color components. This results in a (2 3) 3 = 8 3 = 512-color palette as follows: 9-bit RGB systems include the following: Atari ST (Normally 4 to 16 at once without tricks) MSX2 computers (up to 16 at once) Sega Genesis video game console, (64 colors at once) Sega ...
With the predominance of 24-bit displays, the use of the full 16.7 million colors of the HTML RGB color code no longer poses problems for most viewers. The sRGB color space (a device-independent color space [23] ) for HTML was formally adopted as an Internet standard in HTML 3.2, [24] [25] though it had been in use for some time before that.
The cyclic binary code is also known as the cyclic progression code, the reflected binary code, and the Gray code. This code was originated by G. R. Stibitz, of Bell Telephone Laboratories, and was first proposed for pulse-code modulation systems by Frank Gray, also of BTL. Thus the name Gray code.
Cyclic redundancy check. A cyclic redundancy check ( CRC) is an error-detecting code commonly used in digital networks and storage devices to detect accidental changes to digital data. [1] [2] Blocks of data entering these systems get a short check value attached, based on the remainder of a polynomial division of their contents.