Tech24 Deals Web Search

Search results

1. Results from the Tech24 Deals Content Network

2. Camera Link - Wikipedia

   en.wikipedia.org/wiki/Camera_Link

   Camera Link is a serial communication protocol standard [1] designed for camera interface applications based on the National Semiconductor interface Channel-link. It was designed for the purpose of standardizing scientific and industrial video products including cameras, cables and frame grabbers. The standard is maintained and administered by ...

3. Combined Charging System - Wikipedia

   en.wikipedia.org/wiki/Combined_Charging_System

   The Combined Charging System ( CCS) is a standard for charging electric vehicles. It can use Combo 1 ( CCS1) or Combo 2 ( CCS2) connectors to provide power at up to 350 kilowatts (kW) (max 500 A). [ 1] These two connectors are extensions of the IEC 62196 Type 1 and Type 2 connectors, with two additional direct current (DC) contacts to allow ...

4. BNC connector - Wikipedia

   en.wikipedia.org/wiki/BNC_connector

   Cable. Coaxial. Passband. Typically 0–4 GHz. The BNC connector (initialism of "Bayonet Neill–Concelman") is a miniature quick connect/disconnect radio frequency connector used for coaxial cable. It is designed to maintain the same characteristic impedance of the cable, with 50 ohm and 75 ohm types being made. It is usually applied for video ...

5. Camlock (electrical) - Wikipedia

   en.wikipedia.org/wiki/Camlock_(electrical)

   Camlock (electrical) Camlock panel, without connections. Camlock with connections made. A camlock or cam-lock is an interchangeable electrical connector, often used in temporary electrical power production and distribution, predominantly in North America. [1] Originally a trade name as Cam-Lok, it is now a generic term. [2]

6. SAE J1772 - Wikipedia

   en.wikipedia.org/wiki/SAE_J1772

   SAE J1772, also known as a J plug or Type 1 connector after its international standard, IEC 62196 Type 1, is a North American standard for electrical connectors for electric vehicles maintained by SAE International under the formal title "SAE Surface Vehicle Recommended Practice J1772, SAE Electric Vehicle Conductive Charge Coupler". [ 1]

7. CC-Link Open Automation Networks - Wikipedia

   en.wikipedia.org/wiki/CC-Link_Open_Automation...

   The CC-Link Partner Association (CLPA) offers a family of open-architecture networks. These originated with the CC-Link (Control & Communication) fieldbus in 1996, [1] developed by Mitsubishi Electric Corporation. In 2000, [1] this was released as an “Open” network so that independent automation equipment manufacturers could incorporate ...

8. Ground and neutral - Wikipedia

   en.wikipedia.org/wiki/Ground_and_neutral

   Neutral is a circuit conductor that normally completes the circuit back to the source. NEC states that the neutral and ground wires should be connected at the neutral point of the transformer or generator, or otherwise some "system neutral point" but not anywhere else. [ 1] That is for simple single panel installations; for multiple panels the ...

9. Punch down tool - Wikipedia

   en.wikipedia.org/wiki/Punch_down_tool

   Punch down tool. A punch down tool, punchdown tool, IDC tool, or a Krone tool (named after the Krone LSA-PLUS connector), is a small hand tool used by telecommunication and network technicians. It is used for inserting wire into insulation-displacement connectors on punch down blocks, patch panels, keystone modules, and surface mount boxes ...