Search results
Results from the Tech24 Deals Content Network
Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater ...
Upflow anaerobic sludge blanket ( UASB) technology, normally referred to as UASB reactor, is a form of anaerobic digester that is used for wastewater treatment . The UASB reactor is a methanogenic (methane-producing) digester that evolved from the anaerobic clarigester. A similar but variant technology to UASB is the expanded granular sludge ...
You are free: to share – to copy, distribute and transmit the work; to remix – to adapt the work; Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made.
Trickling filter. A trickling filter is a type of wastewater treatment system. It consists of a fixed bed of rocks, coke, gravel, slag, polyurethane foam, sphagnum peat moss, ceramic, or plastic media over which sewage or other wastewater flows downward and causes a layer of microbial slime ( biofilm) to grow, covering the bed of media.
Wastewater treatment. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment. It is also possible to reuse it.
The Nereda derives from the Greek word “Neraida”. Nereda was a water nymph and one of the daughters of Nereus, the wise and benevolent Greek god of the sea. In Greek mythology Nereda is linked with the terms “pure” and “immaculate”, a reference to the water quality produced by the new technology.
Hydrothermal carbonization. Hydrothermal liquefaction. Mechanical biological treatment (sorting into selected fractions) Refuse-derived fuel. Mechanical heat treatment. Molten salt oxidation. Pyrolysis. UASB (applied to solid wastes) Waste autoclave.
A goal of the wastewater purification by means of AOP procedures is the reduction of the chemical contaminants [7] and the toxicity to such an extent that the cleaned wastewater may be reintroduced [8] into receiving streams or, at least, into a conventional sewage treatment.