Search results
Results from the Tech24 Deals Content Network
The first letter of the color code is matched by order of increasing magnitude. The electronic color codes, in order, are: 0 = Black; 1 = Brown; 2 = Red; 3 = Orange; 4 = Yellow; 5 = Green; 6 = Blue; 7 = Violet; 8 = Gray; 9 = White; Easy to remember. A mnemonic which includes color name(s) generally reduces the chances of confusing black and brown.
A 2.26 kΩ, 1%-precision resistor with 5 color bands (), from top, 2-2-6-1-1; the last two brown bands indicate the multiplier (×10) and the tolerance (1%).. An electronic color code or electronic colour code (see spelling differences) is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others.
A common application of the 25-pair color code is the cabling for the Registered Jack interface RJ21, which uses a female 50-pin miniature ribbon connector, as shown in the following table. The geometry of the pins of the receptacle (right hand image) corresponds to the pin numbers of the table.
A 12-gauge shotgun cartridge in a transparent plastic hull, allowing the contents to be seen. From left to right: brass, propellant, over-powder wad, shot wad, #8 birdshot, over-shot wad, and crimp. A shotgun cartridge, shotshell, or shell is a type of rimmed, cylindrical (straight-walled) ammunition used specifically in shotguns.
The 20- gauge shotgun, also known as 20 bore, is a type of smoothbore shotgun. 20-gauge shotguns have a bore diameter of .615 in (15.6 mm), while the 12-gauge has a bore diameter of .729 in (18.5 mm). [2] 12-gauge and 20-gauge shotguns are the most popular gauges in the United States. [3] [4] The 20-gauge is popular among upland game hunters ...
The move to steel shot reduced the use of 16 and 20 gauges for waterfowl hunting, and the shorter, 2 + 3 ⁄ 4-inch (70 mm), 12-gauge shells as well. However, the 3 + 1 ⁄ 2-inch (89 mm) 12-gauge shell, with its higher SAAMI pressure rating of 14,000 psi (97 MPa) compared to standard 2 + 3 ⁄ 4-inch (70 mm) and 3-inch (76 mm) 12-gauge shells ...
The Model 1912 (shortened to Model 12 in 1919) was the next step from the Winchester Model 1897 hammer-fired shotgun, which in turn had evolved from the earlier Winchester Model 1893 shotgun. The Model 12 was designed by Winchester engineer T.C. Johnson, and was based in part on the M1893/97 design by John M. Browning, in that it used a sliding ...
The Stevens Model 520 was a pump-action shotgun developed by John Browning and originally manufactured by the J Stevens Arms & Tool Company between 1909 and 1916. [1] Stevens was sold to New England Westinghouse on 28 May 1915 and production of civilian firearms was greatly reduced. [1] The company was renamed the "J Stevens Arms Company" on 1 ...