Search results
Results from the Tech24 Deals Content Network
A 75 Ω resistor, as identified by its electronic color code (violet–green–black–gold–red). An ohmmeter could be used to verify this value.. Substances in which electricity can flow are called conductors.
The joule thief is not a new concept. Basically, it adds a LED to the output of a self-oscillating voltage booster, which was patented many decades ago.. US Patent 1949383, [1] filed in 1930, "Electronic device", describes a vacuum tube based oscillator circuit to convert a low voltage into a high voltage.
Pertains to electronic components that control or provide an electrical resistance to circuits. Pages in category "Resistive components" The following 33 pages are in this category, out of 33 total.
The IEEE 315 standard contains a list of Class Designation Letters to use for electrical and electronic assemblies. For example, the letter R is a reference prefix for the resistors of an assembly, C for capacitors, K for relays.
A course developed by Budapest University of Technology and Economics (BTE), Dept. of Electronics Technology concerning Technology of electronics products, chapter "Thick Film" A blog under EDN comparing thick and thin film resistors; A presentation describing the usage of the thick film technology for radio frequencies; Printing thick film hybrids
A 1953 paper "Coding by Feedback Methods" [1] describes "decoding networks" that convert numbers (in any base) represented by voltage sources or current sources connected to resistor networks in a "shunt resistor decoding network" (which in base 2 corresponds to the binary-weighted configuration) or in a "ladder resistor decoding network" (which in base 2 corresponds to R–2R configuration ...
KiCad (/ ˈ k iː ˌ k æ d / KEE-kad [7]) is a free software suite for electronic design automation (EDA). It facilitates the design and simulation of electronic hardware for PCB manufacturing.
A via, sometimes called PTV or plated-through-via, should not be confused with a plated through hole (PTH). A via is used as an interconnection between copper layers on a PCB while the PTH is generally made larger than vias and is used as a plated hole for acceptance of component leads - such as non-SMT resistors, capacitors, and DIP package IC.