Search results
Results from the Tech24 Deals Content Network
E, on the other hand, is readily attacked by ·OH and eventually forms 2,4-hexadiene-1,6-dione (F). As long as there are sufficient ·OH radicals, subsequent attacks on compound F will continue until the fragments are all converted into small and stable molecules like H 2 O and CO 2 in the end, but such processes may still be subject to a ...
Wastewater treatment. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment. It is also possible to reuse it.
t. e. Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate ...
Upflow anaerobic sludge blanket ( UASB) technology, normally referred to as UASB reactor, is a form of anaerobic digester that is used for wastewater treatment . The UASB reactor is a methanogenic (methane-producing) digester that evolved from the anaerobic clarigester. A similar but variant technology to UASB is the expanded granular sludge ...
Moving bed biofilm reactor. Moving bed biofilm reactor ( MBBR) is a type of wastewater treatment process that was first invented by Professor Hallvard Ødegaard at Norwegian University of Science and Technology in the late 1980s. [ 1] The process takes place in an aeration tank with plastic carriers that a biofilm can grow on.
This page consists of a list of wastewater treatment technologies : Activated sludge model. Activated sludge systems. Adsorption/Bio-oxidation process. Advanced oxidation process. Aerated lagoon. Aerobic granular reactor. Aerobic granular sludge technology. Aerobic granulation.
Hydrothermal carbonization. Hydrothermal liquefaction. Mechanical biological treatment (sorting into selected fractions) Refuse-derived fuel. Mechanical heat treatment. Molten salt oxidation. Pyrolysis. UASB (applied to solid wastes) Waste autoclave.
In most cases these will be lower compared with other wastewater treatment alternatives. [20] [4] Depending on the specific situation of the area, construction costs can increase and level up with other technologies. [citation needed] Waste stabilization ponds are one of the cheapest wastewater treatment processes in terms of operation and ...