Search results
Results from the Tech24 Deals Content Network
2.8 L turbo V6 in a 2006 Saab 9-3. This engine is also known as a A28NET, Z28NET, Z28NEL or B284. The LP9 is a 2.8L turbocharged version used for the Saab 9-3, Saab 9-5, and other GM vehicles. It has the same bore and stroke as the naturally aspirated LP1, however the compression ratio is reduced to 9.5:1. The engine is manufactured at Holden's ...
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
Even base vehicles with few optional features will have multiple RPOs, since both standard components (like engine, transmission, and paint color) and extra cost options are assigned codes. The complete configuration of a GM vehicle (as it exited the factory) can be described by specifying the base model and a complete list of its RPO codes. [ 1 ]
The engines were also sold for marine and stationary applications. In a 1938 reorganization, Winton Engine Corporation became the GM Cleveland Diesel Engine Division, and GM's Detroit Diesel Engine Division began production of smaller (50–149 cu in (0.8–2.4 L) per cylinder) diesel engines. Locomotive engines were moved under the GM Electro ...
The LG5 ("V-code") was a special 3.1 L (3,135 cc) turbocharged engine produced with McLaren for the 1989 and 1990 model years. It featured the same multiport fuel injection intake manifolds and throttle body as the LH0, and produced 205 hp (153 kW) at 5200 rpm and 225 lb⋅ft (305 N⋅m) of torque at 2100 rpm.
LD5 was the RPO for engines with chassis code "A", LD7 was used for the 1977-only VIN code "C" engines. One quick idea was tried by Buick engineers—taking an old Fireball V6 picked up at a junkyard and installing it into a 1974 Buick Apollo. The solution worked so well that GM wanted AMC to put the engine back into production.
The Northstar engine is a family of high-performance 90° V engines produced by General Motors between 1993 and 2011. Regarded as GM's most technically complex engine, the original double overhead cam, four valve per cylinder, aluminum block/aluminum head V8 design was developed by Oldsmobile R&D, [citation needed] but is most associated with Cadillac's Northstar series.
Chevrolet Performance, formerly "GM Performance Parts", is an automotive performance parts brand that sells everything from camshafts and cylinder heads to high-performance crate engines and upgrades for late-model Chevrolet vehicles. It was founded in 1967 to support the Trans-Am Camaro race teams.