Search results
Results from the Tech24 Deals Content Network
A 2.26 kΩ, 1%-precision resistor with 5 color bands (), from top, 2-2-6-1-1; the last two brown bands indicate the multiplier (×10) and the tolerance (1%).. An electronic color code or electronic colour code (see spelling differences) is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others.
Silver. ±10%. None. ±20%. The first letter of the color code is matched by order of increasing magnitude. The electronic color codes, in order, are: 0 = B lack. 1 = B rown. 2 = R ed.
The metric codes still represent the dimensions in mm, even though the imperial size codes are no longer aligned. Problematically, some manufacturers are developing metric 0201 components with dimensions of 0.25 mm × 0.125 mm (0.0098 in × 0.0049 in), [ 31 ] but the imperial 01005 name is already being used for the 0.4 mm × 0.2 mm (0.0157 in ...
Extended Display Identification Data. Extended Display Identification Data ( EDID) and Enhanced EDID ( E-EDID) are metadata formats for display devices to describe their capabilities to a video source (e.g., graphics card or set-top box ). The data format is defined by a standard published by the Video Electronics Standards Association (VESA).
Two decades of E12 values, which would give resistor values of 1 Ω to 82 Ω. The E series is a system of preferred numbers (also called preferred values) derived for use in electronic components. It consists of the E3, E6, E12, E24, E48, E96 and E192 series, [ 1] where the number after the 'E' designates the quantity of logarithmic value ...
Exif. Exchangeable image file format (officially Exif, according to JEIDA/JEITA/CIPA specifications) [ 5] is a standard that specifies formats for images, sound, and ancillary tags used by digital cameras (including smartphones ), scanners and other systems handling image and sound files recorded by digital cameras.
List of file signatures. This is a list of file signatures, data used to identify or verify the content of a file. Such signatures are also known as magic numbers or Magic Bytes. Many file formats are not intended to be read as text. If such a file is accidentally viewed as a text file, its contents will be unintelligible.
A common application of the 25-pair color code is the cabling for the Registered Jack interface RJ21, which uses a female 50-pin miniature ribbon connector, as shown in the following table. The geometry of the pins of the receptacle (right hand image) corresponds to the pin numbers of the table.