Search results
Results from the Tech24 Deals Content Network
A "core" is the collection of software components required by the Board Manager and the Arduino IDE to compile an Arduino C/C++ source file for the target MCU's machine language. Some ESP8266 enthusiasts developed an Arduino core for the ESP8266 WiFi SoC, popularly called the "ESP8266 Core for the Arduino IDE". [ 18 ]
Seeeduino V4.2 is an Arduino-compatible board, which is based on ATmega328P MCU, Arduino UNO bootloader, and with an ATmega16U2 as a UART-to-USB converter. The three on-board Grove interface can make your board connect to over 300 Grove modules. Seeeduino Cortex-M0+] SAMD21 Cortex-M0+.
ESP Easy. ESP Easy is a free and open source MCU firmware for the Internet of things (IoT). [1] and originally developed by the LetsControlIt.com community (formerly known as ESP8266.nu community). It runs on ESP8266 [2] Wi-Fi based MCU (microcontroller unit) platforms for IoT from Espressif Systems. The name "ESP Easy," by default, refers to ...
On the left the larger chip version, on the right a small version in USB format. The MSP430 is a mixed-signal microcontroller family from Texas Instruments, first introduced on 14 February 1992. [1] Built around a 16-bit CPU, the MSP430 was designed for low power consumption, [2] embedded applications and low cost.
Distributed temperature sensing. Distributed temperature sensing systems ( DTS) are optoelectronic devices which measure temperatures by means of optical fibres functioning as linear sensors. Temperatures are recorded along the optical sensor cable, thus not at points, but as a continuous profile.
arduino.cc. Arduino ( / ɑːrˈdwiːnoʊ /) is an Italian open-source hardware and software company, project, and user community that designs and manufactures single-board microcontrollers and microcontroller kits for building digital devices. Its hardware products are licensed under a CC BY-SA license, while the software is licensed under the ...
SparkFun ESP8266 Thing. The reason for the popularity of many of these boards over the earlier ESP-xx modules is the inclusion of an on-board USB-to-UART bridge (like the Silicon Labs' CP2102 or the WCH CH340G) and a Micro-USB connector, coupled with a 3.3-volt regulator to provide both power to the board and connectivity to the host (software development) computer – commonly referred to as ...
The following boards have Arduino Nano pin-compatible male pin headers with 0.6-inch row-to-row DIP-30 footprint, but these boards have 3.3 volt logic I/O, instead of 5 volt logic I/O for an Arduino Nano. Blue Pill board has a STM32F103C8T6 microcontroller. [50] [51] [52] Unfortunately, most blue pill boards now contain a fake STM32 from China ...