Search results
Results from the Tech24 Deals Content Network
A 2.26 kΩ, 1%-precision resistor with 5 color bands (), from top, 2-2-6-1-1; the last two brown bands indicate the multiplier (×10) and the tolerance (1%).. An electronic color code or electronic colour code (see spelling differences) is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others.
The following historical mnemonics are generally considered offensive/outdated and should not be used in current electronics training: Bad boys rape our young girls but Violet gives willingly. [11] [12] (Get Some Now (refers to the tolerance bands Gold, Silver or None)) Bad boys run our young girls behind victory garden walls. [13]
In computing, serial presence detect (SPD) is a standardized way to automatically access information about a memory module.Earlier 72-pin SIMMs included five pins that provided five bits of parallel presence detect (PPD) data, but the 168-pin DIMM standard changed to a serial presence detect to encode more information.
EN 1069: Water slides of 2 m height and more. EN 1078: Helmets for pedal cyclists and for users of skateboards and roller skates. EN 1090: Execution of steel structures and aluminium structures (3 parts) EN 1092: Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated.
Dye penetrant inspection. Dye penetrant inspection ( DP ), also called liquid penetrate inspection ( LPI) or penetrant testing ( PT ), is a widely applied and low-cost inspection method used to check surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials ...
The E series is a system of preferred numbers (also called preferred values) derived for use in electronic components. It consists of the E3, E6, E12, E24, E48, E96 and E192 series, [ 1] where the number after the 'E' designates the quantity of logarithmic value "steps" per decade. Although it is theoretically possible to produce components of ...
Time-domain reflectometer for cable fault detection. A time-domain reflectometer ( TDR) is an electronic instrument used to determine the characteristics of electrical lines by observing reflected pulses . It can be used to characterize and locate faults in metallic cables (for example, twisted pair wire or coaxial cable ), [ 1] and to locate ...
A common application of the 25-pair color code is the cabling for the Registered Jack interface RJ21, which uses a female 50-pin miniature ribbon connector, as shown in the following table. The geometry of the pins of the receptacle (right hand image) corresponds to the pin numbers of the table.