Search results
Results from the Tech24 Deals Content Network
Wastewater treatment. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment. It is also possible to reuse it.
This page consists of a list of wastewater treatment technologies : Activated sludge model. Activated sludge systems. Adsorption/Bio-oxidation process. Advanced oxidation process. Aerated lagoon. Aerobic granular reactor. Aerobic granular sludge technology. Aerobic granulation.
Sewage treatment (or domestic wastewater treatment, municipal wastewater treatment) is a type of wastewater treatment which aims to remove contaminants from sewage to produce an effluent that is suitable to discharge to the surrounding environment or an intended reuse application, thereby preventing water pollution from raw sewage discharges. [ 2]
Polishing is also an example. The main by-product from wastewater treatment plants is a type of sludge that is usually treated in the same or another wastewater treatment plant. [5]: Ch.14 Biogas can be another by-product if the process uses anaerobic treatment. Treated wastewater can be reused as reclaimed water. [6] The main purpose of ...
Moving bed biofilm reactor. Moving bed biofilm reactor ( MBBR) is a type of wastewater treatment process that was first invented by Professor Hallvard Ødegaard at Norwegian University of Science and Technology in the late 1980s. [ 1] The process takes place in an aeration tank with plastic carriers that a biofilm can grow on.
Bioremediation. The human sewage and the process waste from the manufacturing industries are the two major sources of the waste water. In Thailand, the total volume of the wastewater from industries is much greater than that of the domestic sewage. [2] As a result, an effective method is needed. Microbial remediation of xenobiotics has shown to ...
Hydrothermal carbonization. Hydrothermal liquefaction. Mechanical biological treatment (sorting into selected fractions) Refuse-derived fuel. Mechanical heat treatment. Molten salt oxidation. Pyrolysis. UASB (applied to solid wastes) Waste autoclave.
t. e. Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate ...