Tech24 Deals Web Search

Search results

1. Results from the Tech24 Deals Content Network

2. Lumber - Wikipedia

   en.wikipedia.org/wiki/Lumber

   For ceilings heights of 8, 9 or 10 feet (2.4, 2.7 or 3.0 m), studs are available in 92 + 5 ⁄ 8 inches (2.35 m), 104 + 5 ⁄ 8 inches (2.66 m), and 116 + 5 ⁄ 8 inches (2.96 m). [citation needed] North American softwoods. The length of a unit of dimensional lumber is limited by the height and girth of the tree it is milled from. In general ...

3. Plank (wood) - Wikipedia

   en.wikipedia.org/wiki/Plank_(wood)

   Plank (wood) A plank used in the repair of a ship. A plank is timber that is flat, elongated, and rectangular with parallel faces that are higher and longer than wide. [1] Used primarily in carpentry, planks are critical in the construction of ships, houses, bridges, and many other structures. [2] Planks also serve as supports to form shelves ...

4. Framing (construction) - Wikipedia

   en.wikipedia.org/wiki/Framing_(construction)

   Framing side by side units. The erection of a wooden frame in Sabah, Malaysia. Framing, in construction, is the fitting together of pieces to give a structure support and shape. [1] Framing materials are usually wood, engineered wood, or structural steel. The alternative to framed construction is generally called mass wall construction, where ...

5. Plywood - Wikipedia

   en.wikipedia.org/wiki/Plywood

   The most common dimension is 1.2 by 2.4 metres (3 ft 11 in × 7 ft 10 in) or the slightly larger imperial dimension of 4 feet × 8 feet. Plies vary in thickness from 1.4 mm to 4.3 mm. The number of plies—which is always odd—depends on the thickness and grade of the sheet. Roofing can use the thinner 16-millimetre (5 ⁄ 8 in) plywood.

6. Parallel-strand lumber - Wikipedia

   en.wikipedia.org/wiki/Parallel-strand_lumber

   Parallel-strand lumber ( PSL) is a form of engineered wood made from parallel wood strands bonded together with adhesive. It is used for beams, headers, columns, and posts, among other uses. The strands in PSL are clipped veneer elements having a least dimension of not more than inch (6.4 mm) and an average length of at least 300 times this ...

7. Lumbar vertebrae - Wikipedia

   en.wikipedia.org/wiki/Lumbar_vertebrae

   It consists of 5 bones, from the top down, L1, L2, L3, L4 and L5. The lumbar vertebrae are located between the thoracic vertebrae and pelvis. They form the lower part of the human back in humans, and the tail end of the back in quadrupeds. In humans, there are five lumbar vertebrae. The term is used to describe the anatomy of humans and ...