Search results
Results from the Tech24 Deals Content Network
By 1988, the 3 + 1 ⁄ 2-inch was outselling the 5 + 1 ⁄ 4-inch. In South Africa, the 3 + 1 ⁄ 2-inch format was generally called a stiffy disk, to distinguish it from the flexible 5 + 1 ⁄ 4-inch format. The term "3 + 1 ⁄ 2-inch" or "3.5-inch" disk is and was rounded from the 90 mm actual dimension of one side of the rectangular ...
5 1 ⁄ 4 inch Double 2 80 21 256 840 kB 300 MFM Amstrad CPC/PCW: 3 inch Double 1 40 9 512 180 kB 300 MFM Single head drive, but double-sided floppy discs (total of 360 kB per floppy) Amstrad PCW8512/9512: 3 inch Double 2 80 9 512 720 kB 300 MFM 720 kB mode uses both sides - ensure disc inserted correct way up. Apple II: 5 1 ⁄ 4 inch Double 1 35
8-inch floppy disk, inserted in drive, (3½-inch floppy diskette, in front, shown for scale) 3½-inch, high-density floppy diskettes with adhesive labels affixed The first commercial floppy disks, developed in the late 1960s, were 8 inches (203.2 mm) in diameter; they became commercially available in 1971 as a component of IBM products and both drives and disks were then sold separately ...
A Maxell-branded 3-inch Compact Floppy Disk. The floppy disk is a data storage and transfer medium that was ubiquitous from the mid-1970s well into the 2000s. Besides the 3½-inch and 5¼-inch formats used in IBM PC compatible systems, or the 8-inch format that preceded them, many proprietary floppy disk formats were developed, either using a different disk design or special layout and ...
Variables included the size of media (nominal 8-inch, 5 + 1 ⁄ 4-inch, 3 + 1 ⁄ 2-inch and others), encoding of data on the media (FM, MFM, M²FM, GCR), the number of disk tracks, one or two sides, the number of sectors in each track, and hard- or soft-sectoring. Even media that was physically interchangeable between two systems might not ...
The standard designation for a UTS thread is a number indicating the nominal (major) diameter of the thread, followed by the pitch measured in threads per inch.For diameters smaller than 1 / 4 inch, the diameter is indicated by an integer number defined in the standard; for all other diameters, the inch figure is given.
In the normal series, the long edge is the length of the short edge plus 2 inches (10 in or less) or 3 inches (11 in and above). The alternative Super series, denoted SnR, nR Plus or nR+, has an aspect ratio of 3∶2 (or as close as possible) and thus provides a better fit for standard 135 film (35 mm) at sizes of 8 inches or above. 5R is twice ...
Both the 13- and 15-inch models feature an aluminum body with tall 3x2 displays for enhanced productivity. Our 13.5-inch review unit weighed in at 2.86 lbs and measure just 0.57 inches thick. The ...