Search results
Results from the Tech24 Deals Content Network
48-volt electrical system. A 48-volt DC electrical system voltage is a relatively low-voltage electrical system that is increasingly used in vehicles. It began in the 2010s as a way to increase the propulsion and battery recharge during braking for fuel savings in internal combustion engine vehicles, especially mild hybrid vehicles. [ 1]
The Combined Charging System ( CCS) is a standard for charging electric vehicles. It can use Combo 1 ( CCS1) or Combo 2 ( CCS2) connectors to provide power at up to 350 kilowatts (kW) (max 500 A). [ 1] These two connectors are extensions of the IEC 62196 Type 1 and Type 2 connectors, with two additional direct current (DC) contacts to allow ...
A DC connector (or DC plug, for one common type of connector) is an electrical connector for supplying direct current (DC) power. Compared to domestic AC power plugs and sockets, DC connectors have many more standard types that are not interchangeable. The dimensions and arrangement of DC connectors can be chosen to prevent accidental ...
IUoU is a DIN -designation [ 1] (DIN 41773) for a lead-acid battery charging procedure that is also known as 3-stage charging, 3-phase charging, or 3-step charging. It consists of three phases (or stages), to be executed by a battery charger. The three phases are: I-phase (constant electric current ), Uo-phase (constant over- voltage ), and U ...
An automotive battery, or car battery, is a rechargeable battery that is used to start a motor vehicle. Its main purpose is to provide an electric current to the electric-powered starting motor, which in turn starts the chemically-powered internal combustion engine that actually propels the vehicle. Once the engine is running, power for the car ...
42-volt electrical system. In automobiles, a 42-volt electrical system was an electrical power standard proposed in the late 1990s. It was intended to facilitate increasingly-powerful electrically-driven accessories in automobiles, and lighter wiring harnesses. Electric motors were proposed to be used for power steering or other systems ...
e. Electrical wiring in North America follows the regulations and standards applicable at the installation location. It is also designed to provide proper function, and is also influenced by history and traditions of the location installation. The US National Electrical Code is applicable to many areas in the US where state, county or local ...
Battery eliminator circuit. In battery-powered equipment, a battery eliminator circuit ( BEC) is an electronic voltage regulator used to power a subsystem at a different voltage without the need for a supplemental battery. BECs are commonly used in radio-controlled models, which need separate voltages to power the motor and the R/C equipment.