Tech24 Deals Web Search

Search results

1. Results from the Tech24 Deals Content Network

2. 25-pair color code - Wikipedia

   en.wikipedia.org/wiki/25-pair_color_code

   25-pair telco cable pinout. A common application of the 25-pair color code is the cabling for the Registered Jack interface RJ21, which uses a female 50-pin miniature ribbon connector, as shown in the following table. The geometry of the pins of the receptacle (right hand image) corresponds to the pin numbers of the table.

3. Category 5 cable - Wikipedia

   en.wikipedia.org/wiki/Category_5_cable

   Category 5 cable is used in structured cabling for computer networks such as Ethernet over twisted pair. The cable standard prescribes performance parameters for frequencies up to 100 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T (Gigabit Ethernet), and 2.5GBASE-T. 10BASE-T and 100BASE-TX Ethernet connections require ...

4. ANSI/TIA-568 - Wikipedia

   en.wikipedia.org/wiki/ANSI/TIA-568

   A cable terminated according to T568A on one end and T568B on the other is a crossover cable when used with the earlier twisted-pair Ethernet standards that use only two of the pairs because the pairs used happen to be pairs 2 and 3, the same pairs on which T568A and T568B differ. Crossover cables are occasionally needed for 10BASE-T and ...

5. 66 block - Wikipedia

   en.wikipedia.org/wiki/66_block

   The 25-pair standard non-split 66 block contains 50 rows; each row has two (E) or four (M) or six (A) & (B) columns of clips that are electrically bonded. The 25-pair split 50 66 block is the industry standard for easy termination of voice cabling, and is a standard network termination by telephone companies—generally on commercial properties ...

6. IDC (electrical connector) - Wikipedia

   en.wikipedia.org/wiki/IDC_(electrical_connector)

   IDC (electrical connector) An insulation-displacement contact ( IDC ), also known as insulation-piercing contact ( IPC ), is an electrical connector designed to be connected to the conductor (s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip ...

7. Twisted pair - Wikipedia

   en.wikipedia.org/wiki/Twisted_pair

   Common for current LANs. Superseded by Cat 5e, but most Cat 5 cables meet Cat 5e standards. Limited to 100 m between equipment. Cat 5e: UTP, F/UTP, U/FTP: 100 MHz: 1000BASE-T, 2.5GBASE-T: Enhanced Cat 5. Common for current LANs. Same construction as Cat 5, but with better testing standards. Limited to 100m between equipment. Cat 6