Search results
Results from the Tech24 Deals Content Network
A rotating biological contactor is a type of secondary (biological) treatment process. It consists of a series of closely spaced, parallel discs mounted on a rotating shaft which is supported just above the surface of the wastewater. Microorganisms grow on the surface of the discs where biological degradation of the wastewater pollutants takes ...
Wastewater treatment. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment. It is also possible to reuse it.
Moving bed biofilm reactor. Moving bed biofilm reactor ( MBBR) is a type of wastewater treatment process that was first invented by Professor Hallvard Ødegaard at Norwegian University of Science and Technology in the late 1980s. [ 1] The process takes place in an aeration tank with plastic carriers that a biofilm can grow on.
Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater ...
The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa. It is one of several biological wastewater treatment alternatives in secondary ...
A biofilter is a bed of media on which microorganisms attach and grow to form a biological layer called biofilm. Biofiltration is thus usually referred to as a fixed–film process. Generally, the biofilm is formed by a community of different microorganisms ( bacteria, fungi, yeast, etc.), macro-organisms ( protozoa, worms, insect's larvae, etc ...
Bioremediation. The human sewage and the process waste from the manufacturing industries are the two major sources of the waste water. In Thailand, the total volume of the wastewater from industries is much greater than that of the domestic sewage. [2] As a result, an effective method is needed. Microbial remediation of xenobiotics has shown to ...
Sanitary engineering, also known as public health engineering or wastewater engineering, is the application of engineering methods to improve sanitation of human communities, primarily by providing the removal and disposal of human waste, and in addition to the supply of safe potable water. Traditionally a branch of civil engineering and now a ...