Search results
Results from the Tech24 Deals Content Network
A 75 Ω resistor, as identified by its electronic color code (violet–green–black–gold–red). An ohmmeter could be used to verify this value. Substances in which electricity can flow are called conductors. A piece of conducting material of a particular resistance meant for use in a circuit is called a resistor.
Pertains to electronic components that control or provide an electrical resistance to circuits. Pages in category "Resistive components" The following 33 pages are in this category, out of 33 total.
Video sampling tends to work on a completely different scale altogether thanks to the highly nonlinear response both of cathode ray tubes (for which the vast majority of digital video foundation work was targeted) and the human eye, using a "gamma curve" to provide an appearance of evenly distributed brightness steps across the display's full ...
For example, improperly crimped caps on carbon or metal resistors can loosen and lose contact, and the resistor-to-cap resistance can change the values of the resistor [2] Surface-mount resistors delaminating where dissimilar materials join, like between the ceramic substrate and the resistive layer. [21]
Trimmers come in a variety of sizes and levels of precision. For example, multi-turn trim potentiometers exist, in which it takes several turns of the adjustment screw to reach the end value. This allows for very high degrees of accuracy. Often they make use of a worm-gear (rotary track) or a leadscrew (linear track). [1]
One of the functions of many types of multimeters is the measurement of resistance in ohms.. The ohm is defined as an electrical resistance between two points of a conductor when a constant potential difference of one volt (V), applied to these points, produces in the conductor a current of one ampere (A), the conductor not being the seat of any electromotive force.
Series circuits are sometimes referred to as current-coupled or daisy chain-coupled.The current in a series circuit goes through every component in the circuit. Therefore, all of the components in a series connection carry the same current.
For many systems, the terminator is a resistor, with a value chosen to match the characteristic impedance of the transmission line and chosen to have acceptably low parasitic inductance and capacitance at the frequencies relevant to the system. Examples include 75-ohm resistors often used to terminate 75-ohm video transmission coaxial cables.