Search results
Results from the Tech24 Deals Content Network
List of electronic color code mnemonics Mnemonics are used to help memorize the electronic color codes for resistors. Mnemonics describing specific and relatable scenarios are more memorable than abstract phrases.
An electronic color code or electronic colour code (see spelling differences) is used to indicate the values or ratings of electronic components, usually for resistors, but also for capacitors, inductors, diodes and others. A separate code, the 25-pair color code, is used to identify wires in some telecommunications cables. Different codes are used for wire leads on devices such as ...
25-pair color code chart used in certain kinds of wiring. A color code is a system for encoding and representing non-color information with colors to facilitate communication. This information tends to be categorical (representing unordered/qualitative categories) though may also be sequential (representing an ordered/quantitative variable).
The codes given in the chart below usually tell the length and width of the components in tenths of millimeters or hundredths of inches. For example, a metric 2520 component is 2.5 mm by 2.0 mm which corresponds roughly to 0.10 inches by 0.08 inches (hence, imperial size is 1008).
The 25-pair color code, originally known as even-count color code, [1] is a color code used to identify individual conductors in twisted-pair wiring for telecommunications .
The CMYK color model (also known as process color, or four color) is a subtractive color model, based on the CMY color model, used in color printing, and is also used to describe the printing process itself. The abbreviation CMYK refers to the four ink plates used: c yan, m agenta, y ellow, and k ey (black). The CMYK model works by partially or ...
List of color spaces and their uses This is a list of color spaces, grouped by the color model that is used for part of their specification.
^ a b Any temperature coefficient not assigned its own letter shall be marked "Z", and the coefficient found in other documentation. ^ Before a grey colored ring was assigned to a tolerance of ±0.01% with IEC 60062:2016, some manufacturers used a grey colored ring to indicate a non-standardized tolerance of ±0.05%.