Search results
Results from the Tech24 Deals Content Network
The Standard Time is the product of three factors: Observed time: The time measured to complete the task. Performance rating factor: The number pace the person is working at. 90% is working slower than normal, 110% is working faster than normal, 100% is normal. This factor is calculated by an experienced worker who is trained to observe and ...
CEP is not a good measure of accuracy when this distribution behavior is not met. Munitions may also have larger standard deviation of range errors than the standard deviation of azimuth (deflection) errors, resulting in an elliptical confidence region. Munition samples may not be exactly on target, that is, the mean vector will not be (0,0).
Time on target. Time on target ( TOT) is the military co-ordination of artillery fire by many weapons so that all the munitions arrive at the target at roughly the same time. The military standard for coordinating a time-on-target strike is plus or minus three seconds from the prescribed time of impact. In terms of target area, the historical ...
Operational availability is a management concept that evaluates the following. [1] Any failed item that is not corrected will induce operational failure. is used to evaluate that risk. Operational failure is unacceptable in any situation where the following can occur. In military acquisition, operational availability is used as one of the Key ...
MIL-STD-105. MIL-STD-105 was a United States defense standard that provided procedures and tables for sampling by attributes based on Walter A. Shewhart, Harry Romig, and Harold F. Dodge sampling inspection theories and mathematical formulas. Widely adopted outside of military procurement applications.
The wet-bulb globe temperature ( WBGT) is a measure of environmental heat as it affects humans. Unlike a simple temperature measurement, WBGT accounts for all four major environmental heat factors: air temperature, humidity, radiant heat (from sunlight or sources such as furnaces), and air movement (wind or ventilation). [1]
Mean time between failures ( MTBF) is the predicted elapsed time between inherent failures of a mechanical or electronic system during normal system operation. MTBF can be calculated as the arithmetic mean (average) time between failures of a system. The term is used for repairable systems while mean time to failure ( MTTF) denotes the expected ...
Standard time. Standard time is the synchronization of clocks within a geographical region to a single time standard, rather than a local mean time standard. Generally, standard time agrees with the local mean time at some meridian that passes through the region, often near the centre of the region. Historically, standard time was established ...