Ad
related to: resistor color code acronym
Search results
Results from the Tech24 Deals Content Network
A controller area network (CAN) is a vehicle bus standard designed to enable efficient communication primarily between electronic control units (ECUs). Originally developed to reduce the complexity and cost of electrical wiring in automobiles through multiplexing, the CAN bus protocol has since been adopted in various other contexts.
A cable color scheme, known as even-count color code, is determined for 25 pairs of conductors as follows: [7] For each ring, the primary, more prominent color is chosen from the set blue, orange, green, brown, and slate, in that order, and the secondary, thinner stripe color from the set of white, red, black, yellow, and violet colors, in that ...
ISO 3166-1 (Codes for the representation of names of countries and their subdivisions – Part 1: Country codes) is a standard defining codes for the names of countries, dependent territories, and special areas of geographical interest.
2-letter and 2-digit codes from the ANSI standard INCITS 38:2009 (supersedes FIPS 5-2) USPS: 2-letter codes used by the United States Postal Service USCG: 2-letter codes used by the United States Coast Guard (bold red text shows differences between ANSI and USCG) Abbreviations: GPO
I have come across a 5-band resistor with the following color code: red-violet-gold-gold-yellow. The value of this resistor is marked 2.7 ohms in my schematic. I understand if there is a gold 4th band in a 5-band resistor, but a 3rd and 4th gold band?
SOH is the ASCII "start of header" code, with binary value 0x01. DDD is the ordinal date (day of year), from 1 to 366. HH, MM and SS are the time of the start bit. The code is terminated by a CR+LF pair. At the end of the timecode, the serial line is idle until the start of the next code. There is no idle time between other characters.
Plugs and sockets on consumer equipment are conventionally color-coded to aid correct connections. The standard [21] colors for the various signals are shown below; however, beyond 7.1 audio, the standard has degraded to a more general white/yellow, red/blue, and green/yellow color scheme for each cable respectively.
Julius Edgar Lilienfeld, who proposed the concept of a field-effect transistor in 1925.. The concept of a field-effect transistor (FET) was first patented by the Austro-Hungarian born physicist Julius Edgar Lilienfeld in 1925 [1] and by Oskar Heil in 1934, but they were unable to build a working practical semiconducting device based on the concept.
Ad
related to: resistor color code acronym