Search results
Results from the Tech24 Deals Content Network
Encoder (digital) A General encoder's block diagram. An encoder (or "simple encoder") in digital electronics is a one-hot to binary converter. That is, if there are 2 n input lines, and at most only one of them will ever be high, the binary code of this 'hot' line is produced on the n -bit output lines. A binary encoder is the dual of a binary ...
The principle is to adjust the DAC's input code until the DAC's output comes within ± 1 ⁄ 2 LSB to the analog input which is to be converted to binary digital form. Servo tracking ADC: It is an improved version of a counting ADC. The circuit consists of an up-down counter with the comparator controlling the direction of the count.
Flash ADC. A flash ADC (also known as a direct-conversion ADC) is a type of analog-to-digital converter that uses a linear voltage ladder with a comparator at each "rung" of the ladder to compare the input voltage to successive reference voltages. Often these reference ladders are constructed of many resistors; however, modern implementations ...
One way to increment a Gray code number is to convert it into ordinary binary code, add one to it with a standard binary adder, and then convert the result back to Gray code. Other methods of counting in Gray code are discussed in a report by Robert W. Doran , including taking the output from the first latches of the master-slave flip flops in ...
Binary decoder. In digital electronics, a binary decoder is a combinational logic circuit that converts binary information from the n coded inputs to a maximum of 2 n unique outputs. They are used in a wide variety of applications, including instruction decoding, data multiplexing and data demultiplexing, seven segment displays, and as address ...
Double dabble. In computer science, the double dabble algorithm is used to convert binary numbers into binary-coded decimal (BCD) notation. [1] [2] It is also known as the shift-and-add -3 algorithm, and can be implemented using a small number of gates in computer hardware, but at the expense of high latency. [3]
In computing, binary translation is a form of binary recompilation where sequences of instructions are translated from a source instruction set to the target instruction set. In some cases such as instruction set simulation, the target instruction set may be the same as the source instruction set, providing testing and debugging features such ...
Analog-to-digital converter. In electronics, an analog-to-digital converter ( ADC, A/D, or A-to-D) is a system that converts an analog signal, such as a sound picked up by a microphone or light entering a digital camera, into a digital signal.