Search results
Results from the Tech24 Deals Content Network
The Joint Electronics Type Designation System (JETDS), which was previously known as the Joint Army-Navy Nomenclature System (AN System. JAN) and the Joint Communications-Electronics Nomenclature System, is a method developed by the U.S. War Department during World War II for assigning an unclassified designator to
Integrated circuit design involves the creation of electronic components, such as transistors, resistors, capacitors and the interconnection of these components onto a piece of semiconductor, typically silicon.
Download QR code; Wikidata item; Print/export ... Free media repository. MediaWiki Wiki software development. Meta-Wiki
The NMEA 2000 network, like the SAE J1939 network on which it is based, is organized around a bus topology, and requires a single 120Ω termination resistor at each end of the bus. (The resistors are in parallel, so a properly terminated bus should have a total resistance of 60Ω). The maximum distance for any device from the bus is six metres.
Metal electrode leadless face (MELF) is a type of leadless cylindrical electronic surface mount device that is metallized at its ends. MELF devices are usually diodes and resistors. [1] The EN 140401-803 and JEDEC DO-213 standards describe multiple MELF components. [2]
"Magic" smoke being released from an electronic component for demonstration purposes. Magic smoke (also factory smoke, blue smoke, or the genie) is a humorous name for the caustic smoke produced by severe electrical over-stress of electronic circuits or components, causing overheating and an accompanying release of smoke. The smoke typically ...
A US National Electrical Code rule for the number of circuits in a panel board. clamp meter An ammeter that measures current with a split core that can be clamped on a wire. Clapp oscillator An electronic oscillator circuit that uses three capacitors and an inductor. class of accuracy in electrical measurements
The color combinations are applied to the insulation that covers each conductor. Typically, one color is a prominent background color of the insulation, and the other is a tracer, consisting of stripes, rings, or dots, applied over the background. The background color always matches the tracer color of its paired conductor, and vice versa.