Search results
Results from the Tech24 Deals Content Network
Coloured pitches are used to distinguish the field of play (green) from the run-off (red). The hockey pitch is rectangular in shape. The longer perimeter edges are called the side line, the opposing shorter edges are referred to as the back line and the portion of this between the goal posts is known as the goal line The side line must measure 91.40 m (100 yd) and the back line should measure ...
In flight dynamics, longitudinal stability is the stability of an aircraft in the longitudinal, or pitching, plane.This characteristic is important in determining whether an aircraft pilot will be able to control the aircraft in the pitching plane without requiring excessive attention or excessive strength.
Influencing variables for the maximum winding speed are the needle stroke, the rotation angle of the stator (number of poles), the wire diameter and the slot channel width and the helix angle of the angularly slotted stators. The mass of the wire guide and the needle support experience a high acceleration.
Lead angle is the angle between the helix and a plane of rotation. It is the complement of the helix angle, and is used for convenience in worms and hobs. It is understood to be at the standard pitch diameter unless otherwise specified. The lead angle can be expressed as:
A blazed diffraction grating reflecting only the green portion of the spectrum from a room's fluorescent lighting. For a diffraction grating, the relationship between the grating spacing (i.e., the distance between adjacent grating grooves or slits), the angle of the wave (light) incidence to the grating, and the diffracted wave from the grating is known as the grating equation.
Newton's color circle, from Opticks of 1704, showing the colors he associated with musical notes. The spectral colors from red to violet are divided by the notes of the musical scale, starting at D. The circle completes a full octave, from D to D. Newton's circle places red, at one end of the spectrum, next to violet, at the other.
The position of all three axes, with the right-hand rule for describing the angle of its rotations. An aircraft in flight is free to rotate in three dimensions: yaw, nose left or right about an axis running up and down; pitch, nose up or down about an axis running from wing to wing; and roll, rotation about an axis running from nose to tail.
A curve is called a general helix or cylindrical helix [4] if its tangent makes a constant angle with a fixed line in space. A curve is a general helix if and only if the ratio of curvature to torsion is constant. [5] A curve is called a slant helix if its principal normal makes a constant angle with a fixed line in space. [6]