Search results
Results from the Tech24 Deals Content Network
Chemical phosphorus removal. Chemical phosphorus removal is a wastewater treatment method, where phosphorus is removed using salts of aluminum (e.g. alum or polyaluminum chloride), iron (e.g. ferric chloride ), or calcium (e.g. lime). Phosphate forms precipitates with the metal ions and is removed together with the sludge in the separation unit ...
Wastewater treatment. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment. It is also possible to reuse it.
Conventional wastewater treatment refers to various methods of treating different categories of wastewater, and may include any of the following: Sewage treatment – treatment and disposal of human waste. Industrial wastewater treatment – the treatment of wet wastes from manufacturing industry and commerce including mining, quarrying and ...
Effluent sewer systems, as well as all sewer systems, can use two methods to transport wastewater to a treatment facility. These methods are gravity and pumping, also called pressure systems. Gravity systems use pipes that are laid on a slight downhill slope to transport wastewater. Effluent pumping systems have pipes that are buried at a ...
Aerobic treatment system. An aerobic treatment system ( ATS ), often called an aerobic septic system, is a small scale sewage treatment system similar to a septic tank system, but which uses an aerobic process for digestion rather than just the anaerobic process used in septic systems. These systems are commonly found in rural areas where ...
Combined sewer. A combined sewer system. During dry weather (and small storms), all flows are handled by the publicly owned treatment works (POTW). During large storms, the relief structure allows some of the combined stormwater and sewage to be discharged untreated to an adjacent water body. A combined sewer is a type of gravity sewer with a ...
t. e. Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate ...
Infiltration/Inflow ( I/I or I&I) is the process of groundwater, or water from sources other than domestic wastewater, entering sanitary sewers. I/I causes dilution in sanitary sewers, which decreases the efficiency of treatment, and may cause sewage volumes to exceed design capacity. Although inflow is technically different from infiltration ...