Tech24 Deals Web Search

  1. Ads

    related to: 1:2:4 concrete mix strength

Search results

  1. Results from the Tech24 Deals Content Network
  2. Abrams' law - Wikipedia

    en.wikipedia.org/wiki/Abrams'_law

    Abrams' law. Abrams' law (also called Abrams' water-cement ratio law) [1] is a concept in civil engineering. The law states the strength of a concrete mix is inversely related to the mass ratio of water to cement. [1] [2] As the water content increases, the strength of concrete decreases. Abrams’ law is a special case of a general rule ...

  3. Concrete slump test - Wikipedia

    en.wikipedia.org/wiki/Concrete_slump_test

    The test is carried out using a metal mould in the shape of a conical frustum known as a slump cone or Abrams cone, that is open at both ends and has attached handles.The tool typically has an internal diameter of 100 millimetres (3.9 in) at the top and of 200 millimetres (7.9 in) at the bottom with a height of 305 millimetres (12.0 in).The cone is placed on a hard non-absorbent surface.

  4. Water–cement ratio - Wikipedia

    en.wikipedia.org/wiki/Water–cement_ratio

    The water–cement ratio ( w/c ratio, or water-to-cement ratio, sometimes also called the Water-Cement Factor, f) is the ratio of the mass of water ( w) to the mass of cement ( c) used in a concrete mix: The typical values of this ratio f = w⁄c are generally comprised in the interval 0.40 and 0.60. The water-cement ratio of the fresh concrete ...

  5. Creep and shrinkage of concrete - Wikipedia

    en.wikipedia.org/.../Creep_and_shrinkage_of_concrete

    The paste has a porosity of about 0.4 to 0.55 and an enormous specific surface area, roughly 500 m 2 /cm 3. Its main component is the tri-calcium silicate hydrate gel (3 CaO · 2 SiO 3 · 3 H 2 O, in short C 3 S 2 H 3). The gel forms particles of colloidal dimensions, weakly bound by van der Waals forces.

  6. Ready-mix concrete - Wikipedia

    en.wikipedia.org/wiki/Ready-mix_concrete

    In the UK, ready-mixed concrete is specified either informally, by constituent weight or volume (1-2-4 or 1-3-6 being common mixes) or using the formal specification standards of the European standard EN 206+ A1, which is supplemented in the UK by BS 8500. This allows the customer to specify what the concrete has to be able to withstand in ...

  7. Properties of concrete - Wikipedia

    en.wikipedia.org/wiki/Properties_of_concrete

    The ultimate strength of concrete is influenced by the water-cementitious ratio (w/cm), the design constituents, and the mixing, placement and curing methods employed.All things being equal, concrete with a lower water-cement (cementitious) ratio makes a stronger concrete than that with a higher ratio. [2]

  1. Ads

    related to: 1:2:4 concrete mix strength