Ad
related to: wastewater treatment plant process description worksheet sample
Search results
Results from the Tech24 Deals Content Network
Wastewater treatment. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment. It is also possible to reuse it.
Advanced oxidation process. Advanced oxidation processes ( AOPs ), in a broad sense, are a set of chemical treatment procedures designed to remove organic (and sometimes inorganic) materials in water and wastewater by oxidation through reactions with hydroxyl radicals (·OH). [1] In real-world applications of wastewater treatment, however, this ...
Dissolved air flotation. Dissolved air flotation ( DAF) is a water treatment process that clarifies wastewaters (or other waters) by the removal of suspended matter such as oil or solids. The removal is achieved by dissolving air in the water or wastewater under pressure and then releasing the air at atmospheric pressure in a flotation tank basin.
A rotating biological contactor is a type of secondary (biological) treatment process. It consists of a series of closely spaced, parallel discs mounted on a rotating shaft which is supported just above the surface of the wastewater. Microorganisms grow on the surface of the discs where biological degradation of the wastewater pollutants takes ...
Process description. UASB uses an anaerobic process whilst forming a blanket of granular sludge which suspends in the tank. Wastewater flows upwards through the blanket and is processed (degraded) by the anaerobic microorganisms. The upward flow combined with the settling action of gravity suspends the blanket with the aid of flocculants. The ...
Nereda. Nereda is a wastewater treatment technology invented by Mark van Loosdrecht of the Delft University of Technology in the Netherlands. The technology is based on aerobic granulation and is a modification of the activated sludge process . Aerobic granular sludge can be formed by applying specific process conditions that favour slow ...
Activated sludge tank at Beckton sewage treatment plant, UK. The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa. It is one of several ...
The adsorption/bio-oxidation process ( AB process) is a two-stage modification of the activated sludge process used for wastewater treatment. It consists of a high-loaded A-stage and low-loaded B-stage. The process is operated without a primary clarifier, with the A-stage being an open dynamic biological system.
Ad
related to: wastewater treatment plant process description worksheet sample