Search results
Results from the Tech24 Deals Content Network
A goal of the wastewater purification by means of AOP procedures is the reduction of the chemical contaminants [7] and the toxicity to such an extent that the cleaned wastewater may be reintroduced [8] into receiving streams or, at least, into a conventional sewage treatment.
Chemical phosphorus removal is a wastewater treatment method, where phosphorus is removed using salts of aluminum (e.g. alum or polyaluminum chloride), iron (e.g. ferric chloride ), or calcium (e.g. lime). Phosphate forms precipitates with the metal ions and is removed together with the sludge in the separation unit ( sedimentation tank ...
t. e. Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate ...
Biological and chemical processes such as oxidation are another example. Polishing is also an example. The main by-product from wastewater treatment plants is a type of sludge that is usually treated in the same or another wastewater treatment plant. [5]: Ch.14 Biogas can be another by-product if the process uses anaerobic treatment. Treated ...
Wastewater treatment. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment. It is also possible to reuse it.
Upflow anaerobic sludge blanket ( UASB) technology, normally referred to as UASB reactor, is a form of anaerobic digester that is used for wastewater treatment . The UASB reactor is a methanogenic (methane-producing) digester that evolved from the anaerobic clarigester. A similar but variant technology to UASB is the expanded granular sludge ...
Coagulation is a chemical process that involves neutralization of charge whereas flocculation is a physical process and does not involve neutralization of charge. The coagulation-flocculation process can be used as a preliminary or intermediary step between other water or wastewater treatment processes like filtration and sedimentation.
Bioremediation. The human sewage and the process waste from the manufacturing industries are the two major sources of the waste water. In Thailand, the total volume of the wastewater from industries is much greater than that of the domestic sewage. [2] As a result, an effective method is needed. Microbial remediation of xenobiotics has shown to ...