Search results
Results from the Tech24 Deals Content Network
The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset. To reset the electronic throttle control system, perform the following:
Prior to requesting service, though, you can try to reset the system using the following steps: 1) Insert ignition key and turn to "ON" position but do not start the engine; 2) Wait for all the warning lights to go out. The check engine light may remain on; 3) Slowly depress the accelerator pedal all the way to the floor; 4) Slowly release the ...
What the ESC light means. It is important to understand how your particular control system works because the ESC light on the dash could have multiple meanings. Generally, the light will illuminate when the computer is actively trying to maintain traction control. This light will stay lit only while the vehicle is not under control.
Tip: The headlights are usually accompanied by a symbol of an upside-down light bulb, or a sun. Look for this symbol to help you find the headlights in your car. Step 2: Determine the meaning of the headlight symbols. In order to use the correct headlight setting, you’ll need to identify the different headlight symbols.
What the airbag warning light means. Every time the engine is started, the computer does a quick check on the system to make sure everything is working as intended. When you start your car, the airbag warning light will turn on for a few seconds and should turn off automatically if everything is okay. If the light stays on, the computer has ...
Step 1: Research the specifications. Find out what the correct resistance reading of the ignition coils should be for your vehicle. These specifications can usually be found in the factory service manual for the vehicle, and are usually specified as a range, measured in “ohms” (symbol: Ω). Step 2: Locate the ignition coil, or coils, on ...
What the alternator warning light means. When you start the engine, the car will check to make sure the alternator is outputting the correct voltage. This warning light will shut off after a few seconds if the computer has determined that the alternator is functional. When the light stays on, it indicates that the computer has detected an issue ...
No, driving with the TPMS Light on is not safe. It means one of your tires is underinflated or overinflated. You can find the proper tire pressure for your car in your owner’s manual, or on a sticker located on the door, trunk, or fuel door. This can cause undue wear on the tire, potentially lead to a tire failure, and cause a blowout ...
Most Mitsubishi vehicles are equipped with an electronic computer system that is linked to the dashboard. This system triggers a wrench-shaped dashboard symbol, which tells drivers when routine maintenance or an inspection is required. The driver must respond to the issue as soon as possible and resolve it.
The button is marked with the same symbol as the parking Brake Light on the instrument cluster. Press this button to release the parking brake. Step 2: Check if the Brake Light is Still Illuminated. If the parking brake was engaged, causing the brake light to be illuminated, releasing the brake will immediately turn it off.