Search results
Results from the Tech24 Deals Content Network
Running current through a material with resistance creates heat, in a phenomenon called Joule heating. In this picture, a cartridge heater, warmed by Joule heating, is glowing red hot. Resistors (and other elements with resistance) oppose the flow of electric current; therefore, electrical energy is required to push current through the resistance.
Integrated circuit design involves the creation of electronic components, such as transistors, resistors, capacitors and the interconnection of these components onto a piece of semiconductor, typically silicon.
An electric current is a flow of charged particles, [1] [2] [3] such as electrons or ions, moving through an electrical conductor or space. It is defined as the net rate of flow of electric charge through a surface.
In electronics, electric power and telecommunication, coupling is the transfer of electrical energy from one circuit to another, or between parts of a circuit. Coupling can be deliberate as part of the function of the circuit, or it may be undesirable, for instance due to coupling to stray fields.
Different types of noise are generated by different devices and different processes. Thermal noise is unavoidable at non-zero temperature (see fluctuation-dissipation theorem), while other types depend mostly on device type (such as shot noise, [1] [3] which needs a steep potential barrier) or manufacturing quality and semiconductor defects, such as conductance fluctuations, including 1/f noise.
Despite their handling difficulties, and in the particular case of MELF resistors, they are still widely used in high-reliability and precision applications where their predictable characteristics (e.g., low failure rate with well-defined failure modes) as well as their higher performance in terms of accuracy, long-term stability, moisture resistance, high-temperature operation far outweigh ...
Kirchhoff's current law is the basis of nodal analysis. In electric circuits analysis, nodal analysis, node-voltage analysis, or the branch current method is a method of determining the voltage (potential difference) between "nodes" (points where elements or branches connect) in an electrical circuit in terms of the branch currents.
Electrical Tape Color Codes [2] Tape color Usage (U.S.) Usage (U.K.) Usage (International – new) Black Insulation Low voltage, phase A Insulation Low voltage, phase C Low voltage, phase B Red Low voltage, phase B Low voltage, phase A Sheath, 415 V 3 phase Blue Low voltage, phase C Low voltage, phase C Low voltage, neutral Sheath, 230 V Brown