Search results
Results from the Tech24 Deals Content Network
0041–0057. Belgium. Assigned for VFR traffic under Flight Information Services (BXL FIC). [citation needed] 0100. Australia. Flights operating at aerodromes (in lieu of codes 1200, 2000 or 3000 when assigned by ATC or noted in the Enroute Supplement). [6] 0100–0400.
The air traffic control radar beacon system ( ATCRBS) is a system used in air traffic control (ATC) to enhance surveillance radar monitoring and separation of air traffic. It consists of a rotating ground antenna and transponders in aircraft. The ground antenna sweeps a narrow vertical beam of microwaves around the airspace.
Identification friend or foe. Identification, friend or foe ( IFF) is a combat identification system designed for command and control. It uses a transponder that listens for an interrogation signal and then sends a response that identifies the broadcaster. IFF systems usually use radar frequencies, but other electromagnetic frequencies, radio ...
A traffic alert and collision avoidance system ( TCAS, pronounced / tiːkæs /; TEE-kas) is an aircraft collision avoidance system designed to reduce the incidence of mid-air collision (MAC) between aircraft. It monitors the airspace around an aircraft for other aircraft equipped with a corresponding active transponder, independent of air ...
Radar beacon (short: racon) is – according to article 1.103 of the International Telecommunication Union's (ITU) ITU Radio Regulations (RR) [1] – defined as "A transmitter-receiver associated with a fixed navigational mark which, when triggered by a radar, automatically returns a distinctive signal which can appear on the display of the ...
Automatic vehicle location. Automatic vehicle location ( AVL or ~ locating; telelocating in EU) is a means for automatically determining and transmitting the geographic location of a vehicle. This vehicle location data, from one or more vehicles, may then be collected by a vehicle tracking system to manage an overview of vehicle travel.
An equipment code describes the communication (COM), navigation (NAV), approach aids and surveillance transponder equipment on board an aircraft. These alphabetic codes are used on FAA and ICAO flight plan forms to aid Flight service station (FSS) personnel in their handling of aircraft. On the FAA domestic flight plan form (FAA Form 7233-1 ...
A communications satellite 's transponder is the series of interconnected units that form a communications channel between the receiving and the transmitting antennas. [1] It is mainly used in satellite communication to transfer the received signals. A transponder is typically composed of: an input band-limiting device (an input band-pass filter ),