Search results
Results from the Tech24 Deals Content Network
The tanks must be designed to safety standards appropriate for a pressure vessel, such as ISO 11439. [7]The pressure vessels or air storage tanks that can be used in compressed-air vehicles can be made of low pressure (9 atm (130 psi)) or high pressure (more than 240 atm (3,500 psi)), and can be made of composite materials like thermoplastic and fiber reinforced thermoplastics, [6] [8] that ...
Two-phase electrical power was an early 20th-century polyphase alternating current electric power distribution system. Two circuits were used, with voltage phases differing by one-quarter of a cycle, 90°. Usually circuits used four wires, two for each phase. Less frequently, three wires were used, with a common wire with a larger-diameter ...
Diagram of a compressed air system with a PCM heat exchanger. A compressed-air car is a compressed-air vehicle powered by pressure vessels filled with compressed air. It is propelled by the release and expansion of the air within a motor adapted to compressed air. The car might be powered solely by air, or combined (as in a hybrid electric ...
The term separator in oilfield terminology designates a pressure vessel used for separating well fluids produced from oil and gas wells into gaseous and liquid components. A separator for petroleum production is a large vessel designed to separate production fluids into their constituent components of oil, gas and water.
A welded steel pressure vessel constructed as a horizontal cylinder with domed ends. An access cover can be seen at one end, and a drain valve at the bottom centre. A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure . Construction methods and materials may be chosen ...
A motor control center ( MCC) is an assembly to control some or all electric motors in a central location. It consists of multiple enclosed sections having a common power bus and with each section containing a combination starter, which in turn consists of motor starter, fuses or circuit breaker, and power disconnect. [1]
A variable-buoyancy pressure vessel system is a type of rigid buoyancy control device for diving systems that retains a constant volume and varies its density by changing the weight (mass) of the contents, either by moving the ambient fluid into and out of a rigid pressure vessel, or by moving a stored liquid between internal and external variable-volume containers.
Linear motor. Free-body diagram of a U-channel synchronous linear motor. The view is perpendicular to the channel axis. The two coils at centre are mechanically connected, and are energized in "quadrature" (meaning a phase difference of 90° (π/2 radians) between the flux of the magnets and the flux of the coils).