Search results
Results from the Tech24 Deals Content Network
One of the first known V10 engines was used in the 1936 Busch-Sulzer ICRR 9201 prototype locomotive, of which three examples were produced in the United States. [2]The 1965–1984 Leopard 1 armored tank was powered by the MTU MB 838 CaM 500 37.4 L (2,282 cu in) V10 diesel engine.
The Ford Zeta engine, Ford Sigma engine and Ford Cyclone engine all carry the Duratec name, but are otherwise unrelated to each other or the original 1993 Duratec V6. The ambiguous use of the name is similar to Ford's use of the Zetec for the previous generation of gasoline engines, the Duratorq name for diesel engines, and EcoBoost for ...
The DFV is an internal combustion engine that was originally produced by Cosworth for Formula One motor racing.The name is an abbreviation of Double Four Valve, the engine being a V8 development of the earlier four-cylinder FVA, which had four valves per cylinder.
This series of engines became known as the Kent engine because they were made in Ford's Dagenham plant in the English county of Kent. [1]Originally within Ford, it is said that the Kent name was actually born with the A711 and A711M blocks (commonly called the 711M block) with square main bearing caps for the Crossflow series, which represented a vast improvement in the durability of the engines.
The Ford Godzilla engine is a family of V8 engines offered by the Ford Motor Company. The engines are intended to replace the Modular V10 engine and the Boss V8 engine in many uses. [ 1 ] [ 3 ] The engine, first introduced with a displacement of 7.3L was first used with Ford Super Duty trucks starting with the 2020 model year and was later ...
Chapman named the engine the "Lotus Twin-Cam" at its introduction in 1962 and Lotus continued to use that name. When production switched from the Cortina-Lotus to the Ford Cortina Mark II-based Cortina Twin Cam in 1967, Ford began to call the engine the "Lotus-Ford Twin Cam". The engine is also known informally as the "Lotus TC" or the "Twink ...
At the beginning of 1984, Ford Pinto engine displacement range switched from 1.3/1.6/2.0 to 1.6/1.8/2.0. The newly introduced 1.8 L engine used the 2.0 L crankshaft, so to uniform engine parts for the whole range after dropping the 1.3 L — the 1.6 L was redesigned to also take the 2.0 L crankshaft which had a 76.95 mm (3.030 in) stroke.
Starting in 1990, the LX was available with the 3.0 L "Vulcan" V6 engine, that was also used in the Ford Taurus, Ford Ranger, Ford Tempo, and Ford Aerostar. The LX package offered optional equipment, such as a single-disc CD player, and a digital instrument cluster coupled with a fuel economy computer installed in a hidden compartment on top of ...