Search results
Results from the Tech24 Deals Content Network
The 366 cu in (6.0 L) big-block V-8 gasoline engine was used in Chevrolet medium duty trucks and school buses. It had a bore and a stroke of 3.935 in × 3.76 in (99.9 mm × 95.5 mm). This engine was made from the 1960s until 2004.The 366 used 4 rings on the pistons, as it was designed from the very beginning as a truck engine.
The General Motors LS-based small-block engines are a family of V8 and V6 engines designed and manufactured by American automotive company General Motors.First introduced in 1997, the family is a continuation of the earlier first- and second-generation Chevrolet small-block engine, of which over 100 million have been produced altogether, and is also considered to be one of the most popular V8 ...
The Rolls-Royce Avon was the first axial flow jet engine designed and produced by Rolls-Royce. Introduced in 1950, the engine went on to become one of their most successful post- World War II engine designs. It was used in a wide variety of aircraft, both military and civilian, as well as versions for stationary and maritime power.
GM Family 0 engine. The Family 0 is a family of inline piston engines that was developed by Opel, at the time a subsidiary of General Motors, as a low-displacement engine for use on entry-level subcompact cars from Opel / Vauxhall . These engines feature a light-weight cast-iron semi-closed deck engine block with an aluminum cylinder head.
The following is a list of bellhousing patterns used on the many different engines GM has manufactured and the transmissions paired to them, starting from 1949.. NOTE: Every non-integral bellhousing has two bolt patterns: a front pattern to match the engine and a rear pattern to match the transmission; be aware that many other factors affect engine-to-transmission compatibility.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
Both the Buick V6 and the 229 cu in (3.8 L) Chevrolet V6 are 90° V6 engines, and are often referred to as the 3.8L V6. These engines should not be confused as being the same, and are unique engine designs. The 229 cu in (3.8 L) has a 3.736-by-3.48-inch (94.9 mm × 88.4 mm) bore and stroke, identical to the Chevrolet 305 cu in (5.0 L) V8 engine.
It was then used as a warehouse. From 1935, it made all different types of auto parts and service parts as Chevrolet Saginaw Service Parts Plant or from 1969, Chevrolet Saginaw Parts Plant. Closed in 1983, demolished in 1984. Saginaw Steering Gear - Plant 1: Saginaw, Michigan: United States: Steering components: 1906: 1984